Pairing & Reconnecting Bluetooth Headset(s) With Yealink Phones

Pairing & Reconnecting Bluetooth Headset(s) With Yealink Phones

Ensure that Bluetooth is enabled on your Yealink phone:

1. Go to Menu > Basic > Bluetooth
2. If Bluetooth is "Off", use the left or right arrows (or choose the "Switch" option) to change Bluetooth to "On"
3. Choose "Save"

To re-connect a previously-paired headset, please follow these steps:

1. Turn on the Bluetooth headset
2. On your desk phone, go to Menu > Basic > Bluetooth -> Paired Bluetooth Device. You should see your headset listed there
3. Select it and choose "Connect"
4. If you do not see your headset listed you will need to re-pair it

To pair a new the headset with the phone

1. Switch the headset off
2. Keep the multi-function button pressed and gently pull the on/off power slide away from the headset. The LED alternately flashes blue and red. The headset is in pairing mode.
3. On your desk phone, go to Menu > Basic > Bluetooth
4. Choose the "Scan" option
5. When you see your headset in the list, choose it and select "Connect"
6. When prompted for a PIN/password enter "0000" (4 zeroes without quotes) then choose "Ok"

    • Related Articles

    • Upgrading phones

      Synfone provides a wide variety of phones and equipment and works diligently to ensure reliable, high performing phones are available. If you are interested in upgrading one or more phones, please submit a ticket to Synfone Support for further ...

    • None of the phones are working

      1.      Check to ensure the internet service is working for items with a wired connection. If the internet is not working, the phones will not work as they use the internet connection to communicate with the phone server. It is recommended that if ...

    • Some phones are not working

      Typically if some phones are not working but others within the same office are working, the issue is with the local network infrastructure. Many times, rebooting your network devices like your network switches or your router will resolve this type of ...

    • A single phone isn't working

      1.      Check to ensure that the phone has power Some phones have a power adapter that plugs into a power outlet and others are powered via PoE. If you are not sure which method your office uses, please consult with your IT support personal. If the ...

    • Replacing cables or cords

      All of the phones supported by Synfone use standard network cables and phone cords. Replacing the cables or cords do not require any special products or equipment. However, if the phone has a power adapter, that is specific to that model phone. If a ...